Access Point Utility

How to Install the AP Utility

Please run the program “setup.exe” Follow the instructions of the setup program and
select the directory where the application is installed.

Using the AP Utility

Before using the AP Utility Application, please make sure you have plugged the USB
cable to the Access Point USB port and installed the driver of the Access Point and the AP Utility Application.
On the Start Menu, choose Start->Programs->Atmel Utilities->DFU->DFU to run the
AP Utility Application. Then, select the Configuration button to start configuring.


You can use the Get, Modify and Set buttons to configure the parameters for the
Wireless LAN Access Point.
“Get” View the current parameters of the Access Point.
“Modify” Set new values to the pre-selected parameters.
“Set” Download any changes to the Access Point.
For Example:
1. Press the Get button to view all the current parameters of the Access Point.
2. Click one of the parameters you would like to configure.
3. Press the Modify button and a sub-window for the parameter setting will be
displayed.
4. After changing the values, press the Set button to confirm the setting is completed

NOTE: not all AP are supported

http://rapidshare.com/files/43565487/Atmel_SNMP_manager_v1.743.exe
http://rapidshare.com/files/43565483/smc-AP_manager_v1.7.zip

Password default : booktraining.net